Bran Protein Powder Milk Powder Starch Yeast Salt Online Moisture Analyzer

• Customization: Available
• After-sales Service: Lifelong
• Warranty: 1 Year
• Model NO.: CY-400
• Type: Induction Moisture Meter
• Analysis Method: Physical Analysis
• Display: Digital
• Application: Textile
• Portable: Non-portable
• Physical Analysis Type: Distilling Layered Method
• Chemical Analysis Type: Toluene Method
• Operating Mode: Keyboard
• Heating Mode: Step Heating
• Off Mode: Automatic
• Est Range: 0-99%
• Resolution: 0.01%
• Measuring Distance: 20-40cm
• Light Diameter: 10mm
• Power Supply: AC 220V 50Hz
• Transport Package: Plywood
• Specification: 75cm*65cm*70cm
• Trademark: CYEEYO
• Origin: Shan Dong
• HS Code: 9027500090
• Production Capacity: 100
• Package Size: 69.00cm * 98.00cm * 187.00cm
• Package Gross Weight: 89.000kg
• Lead Time: 15 days (1 - 1 Pieces) ; To be negotiated ( > 1 Pieces)

Product Description

              Bran Protein Powder Milk Powder Starch Yeast Salt Online Moisture Analyzer

TECHNICAL SPECIFICATIONS

Measurement range: 0-50% (the maximum measurement range is when the material is saturated with

water)

Static accuracy: ±0.1%

Measurement accuracy: ±0.2% (change in material composition will cause measurement error)

Measurement channels: 50

Height range: 250mm±100mm

Operating temperature: 0-50ºC

Operating humidity: 5-90%

Repeatability: 0.1%

Response time: 0-60 seconds

Filter range: 0-2.5%

Power supply: AC 110-240V 50Hz/60Hz

Power consumption: 150W

Light interference: not affected by changes in external light and no need for a hood over the probe

Temperature influence: With automatic temperature offset function, it is basically not affected by changes

in external temperature

The probe should be installed in an easily accessible place. First, it should be easy to sample under

the probe and easy to maintain (such as wiping windows, cleaning surfaces, etc.);

(1) The machine should be installed in a safe position for measuring where the material to gauge will not

have direct contact with the probe;

(2) probe installation height and direction: (see Figure 2.1) The probe is to be installed over a certain

material that is not fragmented as on a conveyor belt or a vibrating conveyor. Note that the material must

at least demonstrate a thickness of 10mm (recommended 15mm above) in order to completely ignore the

conveyor belt as a source of possible confusing effect in the background.

(3) In order to allow for a longer period of time for the material to reach a state of balance before taking

measurements, the probe of the dryer or other equipment for adjustment is preferably installed as far as it

can be from the steam outlet;

(4) It is a basic requirement for the production line to ensure that the material to measure embraces a

certain degree of consistency and continuity in the production process;

(5) The consistency of the material has a great influence on the measurement accuracy compared with the

oven drying method, especially on the latter's double-sampling deviation.

Weight about 18kgs

Packaging & Shipping

Our Advantages

FAQ