| Customization: | Available |
|---|---|
| After-sales Service: | Lifelong |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Description
The equipment is designed according to the corresponding provisions of GB16915.1-2003, GB15092,1-2003,IEC60669-1,IEC61058-1 and other standards. It is used to detect the mechanical life test of household / industrial and similar switch products, potentiometers and rotary gear switches. It can simulate the quality and reliability of products after a certain number of switching times in actual work. So as to improve product quality and provide reliable basis for product R & D.
Parameter
1. Three stations, can be tested at the same time, and the number of stations can be customized.
2. The rotation angle can be adjusted by 0-200 degrees, and the angle can be customized according to requirements.
3. The speed (digital display) is adjustable for 10-60 times / min, and the speed can be customized as required
4. The number of times is set 1-999999 times, which can be set arbitrarily, and the machine will stop automatically when the number of times is reached.
5. Continuity test: the continuity or disconnection of the switch during the memory life test. In case of any defect, the machine will automatically stop counting.
6. Dimension: 750×470×720mm(L × W × H)
7. Voltage: 220V / 50Hz.
8. Power; 0.2kw
9.weight: 40kg
Usage:
1. Adjustment of bending angle: open the side door of the testing machine, loosen the connecting screw between the motor driving wheel and the connecting rod, move the position of the sliding block wrapped in the chute, mark the index on the swing mechanism to the required angle during the test, and then tighten the connecting screw between the driving wheel and the connecting rod.
2. Short the positive and negative of the tested lead plug piece, and then clamp it on the test fixture.
During the test, if the tested power line on a station has been bent, the counter of the station will automatically stop counting. At this time, the user can stop the machine for inspection or replace it with a new sample, or continue the test until the end of the test.
){kind=link}