| Customization: | Available |
|---|---|
| After-sales Service: | Lifelong |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Description
Performance specification:
This series of impact testing machine is used to test the impact resistance of metal materials under dynamic load. It is a necessary testing instrument for metallurgy, machinery manufacturing and other units. The cross section of the sample is 10 × 10mm is mainly used for testing ferrous metals with high impact toughness, especially steel and its alloys. The machine adopts double column support, which improves the rigidity of the impact machine, ensures the accuracy of test data, and greatly improves the service life of the test machine. The maximum impact energy of the machine is 300j. The machine is equipped with an axial positioning device. It has the advantages of simple operation, high efficiency, high positioning accuracy and reliable indication. Therefore, it is especially suitable for cold impact test with low temperature tank for impact test. This machine adopts three-phase four wire 380V power supply, and is also suitable for three-phase five wire power supply.
1. It adopts PC microcomputer control, electric swing, impact, microcomputer measurement, calculation, screen digital display and printing, etc., with high work efficiency and high test accuracy. After impacting the sample, the residual energy can be used to swing automatically to prepare for the next test. The operation is simple and the work efficiency is high. In the continuous impact test laboratory and a large number of impact test metallurgy, machinery manufacturing and other industries, its advantages can be more reflected. The computer can calculate and display the impact absorbed energy, impact toughness, pendulum angle and average value of the test, and print the data and average value of the test.
2. The main engine is supported by double supports. The main shaft is supported by simply supported beam, and the radial load distribution of bearing is reasonable. In particular, a large number of impact machines can reduce the deformation of main shaft and greatly reduce the energy loss caused by bearing friction.
3. It adopts two-stage standard reducer to lift hammer and runs smoothly.
4. The hanging and swinging device adopts hydraulic buffer, and the hanging and swinging is stable.
5. The three-dimensional design of the pendulum ensures the accuracy of the strike center and the pendulum torque.
6. The impact knife is fixed with screws, which is easy to replace
7. After the sample is broken, it can be judged automatically and output
8. The main engine is equipped with safety pin and safety net.
According to the standard GB / T3808-2002 , GB / T229-2007,ISO R148 ,ISO R83 .
Structural features and advantages:
The pendulum shaft of charpy impact machine is supported by charpy supported beam. The two ends of the pendulum shaft are supported by bearings. The pendulum is hung in the middle of the pendulum shaft. The supporting column is symmetrical in front and back. It has the characteristics of good stability, high rigidity, simple and reliable structure. There is no shaking during pendulum impact.
Main technical parameters
1. Impact energy: 450J, 300J, 150J (completed by counterweight)
2. Impact speed: 5.2m/s
3. Pre lifting angle of pendulum: 150°
4. Sample support span: 40mm
5. Support jaw fillet: R1.0 ~ 1.5mm
6. Impact blade fillet: R2.0 ~ 2.5mm R8 mm
7. Distance from pendulum center to impact point: 750mm
8. Standard sample size: 10 (7.5, 5, 2.5) × 10 × 55mm
9. Power supply: three phase four wire 50 Hz 380 V 180 w
10. Dimension: 2025 ×2100 × 800mm
11. Angle accuracy: 0.1°
12. Weight: about 750kg
Main equipment configuration:
1. One mainframe;
2. 450J, 300J and 150J pendulums (completed by counterweight)
3. One reducer (installed on the main engine);
4. A set of swing drive device (installed on the host machine);
5. A set of automatic hanging device (installed on the host machine);
6. A set of safety protection device
7. One photoelectric sensor;
8. A set of Lenovo microcomputer system;
9. One HP laser printer;
10. A set of special measurement software.
11. One internal hexagon wrench S = 12 (screw for pressing plate of wrench mouth seat);
12. One sample centering device;
13. One support adjuster;
14. Four foundation screws;
15. Adjust four pieces of inclined iron;
16. A set of protective net;
Description of measurement and control part:
lWindows platform, screen display, mouse operation;
If you need to output the experiment report, you need to install Microsoft word or excel version at least Office 2003.
lThe software supports multiple pendulums
lRecord the impact strength, impact energy, etc. the maximum and minimum average value and standard deviation can also be calculated.
lThe experimental results are calculated automatically
lAutomatic measurement of swing period
){kind=link}