Lab Icp Ms Inductively Coupled Plasma Mass Spectrometer with EXW Price

• After-sales Service: Lifelong
• Warranty: 1 Year
• Max Diameter of Workpiece: <500mm
• Mass Scope of Workpiece: <900kg
• Type: Balancing Machine
• Maxcapacity: >1000KN
• Model NO.: CY-6300A
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Needle
• Control: Computer Control
• Weight: 0-100Kg
• Power Source: AC220V
• Oil Cylinder Position: Under
• Avelength Range: 175nm ~ 800nm
• Resolution (Fwhm): 0.009nm (at 313nm)
• Wavelength Stop: ±0.001nm
• Photomultiplier Tube: R306 and One Other Type
• Transport Package: Carton
• Specification: 75cm*65cm*70cm
• Trademark: CYEEYO
• Origin: Shan Dong
• HS Code: 9027500090
• Production Capacity: 100

Product Description

                                               

                                       Lab icp ms Inductively Coupled Plasma Mass Spectrometer With EXW Price

1  Instrument Name
ICP6300A ICP Atomic Emission Spectrometer


2  Introduction
This instrument is a compact, low cost, superior operation sequential high frequency inductively coupled plasma atomic emission spectrometer designed to be used for a broader range of ICP atomic emission spectrophotometry analysis needs.

This instrument has the following characteristics:
1. Can be placed on a tabletop with limited restrictions on temperature ranges etc.
2. Simple operation with efficient routine analysis.


3  Components
This instrument is comprised of the following units:
1. RF Power Supply Unit
2. Sample Introduction Unit
3. Spectroscope Unit
4. Control Unit
5. Computer Unit

4  Unit Specifications
4.1  High Frequency Power Supply Unit
Frequency 27.12MHz
Output 0.5 ~ 1.2kW (0.1kW increment settings)
Circuitry All Solid State Circuitry
Cooling Air-cooled
Matching π-Type Auto Matching
Ignition Auto Ignition

4.2  Sample Introduction Unit
Composition Quartz Glass Torch, Concentric Nebulizer,
Spray Chamber
Gas Flow Range
Plasma Gas 14 ~ 20L/min
Auxiliary Gas 0 ~ 2L/min
Carrier Gas 0 ~ 0.4MPa
Chamber Gas 0 ~ 2L/min
Watching Device Argon Gas Pressure Low
Water Pressure Low (for work coil cooling)
Torch Unit Door Open
Plasma Gas Flow

4.3  Spectroscope Unit
Type Double Monochromator Type
Wavelength Range 175nm ~ 800nm
Resolution (FWHM) 0.009nm (at 313nm)
Entrance/Exit Slit Fixed
Wavelength Drive Stepping Motor
Wavelength Stop ±0.001nm
   Reproducibility
Detector Photomultiplier Tube :
R306 and one other type
1. Order Sorter
Mount Seya-Namioka
Focal Length 20cm
Diffraction Grating Holographic Concave Diffraction Grating
2. Echelle Monochromator
Mount Czerny-Turner
Focal Length 30cm
Diffraction Grating Echelle Plane Diffraction Grating
3. Vacuum Ultraviolet Region
Can be Purged with Argon or Nitrogen Gas
4. Condensing System
Variable Observation Height (0~30mm)

4.4  Control Unit
Spectroscope Wavelength Scanning
Photomultiplier Tube Change
Photomultiplier Tube voltage Change
RF Output Control
Chamber Gas

4.5  Computer Unit
CPU MMX Technology Pentium^TM 166MHz or Higher
RAM 32MB or more
HDD 2GB or more
FDD 3.5 inch (3 mode)
CD-ROM 8x Speed or greater
OS Microsoft^®Windows^®95 Operating System
CRT 17 Color Monitor
Printer A4 Laser Printer

 Pentium is a registered trademark of Intel.
 Microsoft and Windows are registered trademarks of Microsoft Corporation.

5  Software
The software for this instrument utilizes the features of the Windows system and can be operated similarly with other market software. The software has compacted the features necessary to perform analysis and provides a user friendly environment for a wide range of analysis needs.  The software contains the 6 features explained below.

5.1  File
Selects the analysis and condition editing operations explained below as well as opening analysis condition and result files.

5.2  Measurement Conditions
Creates the measurement conditions necessary for quantitative and qualitative analysis measurements.
Determining Analysis Conditions
Measurement
Measures in a single measurement  profiles with a maximum 80 elements × 20 analysis lines.
Qualitative Determination
Performs qualitative analysis based on the spectrum profile data acquired from the measurement.  Identifies the elements included in the sample in 3 steps and calculates the estimated concentration.
Condition Determination
Automatically creates quantitative analysis conditions based on the spectrum profile data acquired from the measurement.  Select standard, blank or unknown sample.  Quantiative analysis conditions such as total time, the appropriate analysis line,whether or not to perform background correction,and so on for each element analysis are automatically created.
Edit Analysis Conditions
Edits the analysis conditions used in qualitative analysis measurements.  The conditions are comprised of measurement conditions for each element (analysis line), common conditions, and standard sample conditions.  All necessary conditions can be set and the file saved.  
Also, during condition editing, auxiliary features including tools, analysis condition determination and qualitative determination have been added.  Through this addition, the information acquired during the editing can be used immediately for settings.

5.3  Analysis
Performs qualitative and quantitative analysis.
Qualitative Analysis
Performs high speed identification while measuring a maximum 72 element analysis line profile.  Elements in the sample are identified in 3 steps and the estimated concentration is calculated.
Quantitative Analysis Manual Measurement
Through manual operation of samples, quantiative analysis measurements of up to 80 elements, 170 samples can be performed.  Edit the sample conditions for the indicated quantitative analysis conditions.  Next, click the Measure button to start the measurement.  During measurements, the measurement data, calibration curves and spectrum profile can be viewed.
Quantitative Analysis Autosampler Measurement (option)
Using the autosampler, the sample is automatically introduced and quantitative analysis measurements of up to 80 elements, 170 samples can be performed.  Up to 10 conditions can be selected for the quantitative analysis and continuous measurements are possible with the autosampler.  An auto on/off feature for the plasma has also been added.

5.4  Data
Checks and processed data acquired from each analysis.
Qualitative Data
Displays/edits/prints data acquired from qualitative analysis.
Displays and overlap displays the measured spectrum profile.
Condition Determination Data
Displays/edits (analysis line selection, background correction settings etc.)/prints data acquired using condition determination.
Displays and overlap displays the measured spectrum profile.
Quantitative Data
Displays/edits (unit conversion, dilution degree calculation, molecular weight calculation)/prints measurement data.
Displays/edits (overlapping)/prints spectrum profiles.
Displays/edits (create, unknown concentration calculation, standard addition method)/prints calibration curves.
Loads Excel and pastes the profile data and calibration curve data onto an Excel sheet.  This feature enables the user to freely manage the data information.

5.5  Tool
Contains the tools necessary for normal usage of such things as plasma ignition and wavelength initialization.  Through instrument operation or simple measurements, condition inspection or performance checks can be performed.
Plasma Ignite/Extinguish
Automatically ignites and extinguishes the plasma.
Wavelength Initialization
Automatically initializes the wavelength.
Profile Measurement
Promptly measures the spectrum profile without complicated condition settings.  Can also overwrite up to 5 measured spectrum profiles.
DL Measurement
Measures blank samples/standard samples and calculates the detection limit.
 Distribution Measurement
Creates a graph using the RF output or observation height on the horizontal axis and the intensity or SB ratio on the vertical axis.
Wavelength Correction
Corrects the wavelength deviation of the instrument.  This feature reduces the peak error in analysis.
Instrument Operation
Displays the status and control of the instrument.

5.6  Settings
Maintenance
Maintains the database used for each analysis or maintenance of the instrument.
Wavelength Database
Used for creating the qualitative analysis line or editing the analysis or interference line.
System Data
Edits various data used to control the instrument.  This feature is used for instrument maintenance.
Error History
Automatically records and saves the contents of errors when problems arise with the instrument.  This feature is extremely helpful when troubleshooting.
Option Settings
Enables changes to the display color of the spectrum profile as well as detailed settings for measurements not normally used.

6  Dimensions and Weight
Main Unit 750W×680D×665H(mm), 90kg
(without Autosampler)
RF Power Supply 380W×510D×460H(mm), 32kg


7  Utilities
Cooling Water Soft water, Pressure 0.1 ~ 0.2MPa (minimum 0.05MPa or more during pulsating current), 2L/min or more, 20 ~ 25ºC is ideal.  (no dew formation)
Argon Gas Purity 99.99vol% or more, conforming to JIS specification K1105
Pressure 0.4MPa, flow 16L/min (standard usage).
Nitrogen Gas Nitrogen gas can be used for purging of the spectroscope instead of Argon gas.
(for purging) Purity 99.99vol% or more, dew point -70ºC or less.
Pressure 0.4MPa, flow 10L/min.
Power Supply Single phase AC100V ±10V 15A grounded (average consumed current 7A)
Three Phase △wire AC200V ±20V 15A grounded (average consumbed current 13A)
Note: When using the circulation water cooling system (for work coil), A separate single phase AC100V 2A is required.
Duct Flow 5m3/min or more, 200ºC heat resistance (intake port), diameter 200mmφ with damper attached.
Operating Temperature Room temperature 10 ~ 30ºC and temperature changes within 5ºC/30min.
Humidity 80% or less (no dew formation)




8 Attachments
1. Operation Manual 1 Copy
2. Test Report 1 Copy
3. Computer Attachments 1 Set
4. Printer Attachments 1 Set
5. ICP3600A System CD-R 1
6. Tygon Tube (1/32"×3/32") 1m
7. Tygon Tube (7/16"×9/16") 1m
8. Teflon Tube (AWG24) 1m
9. Cone Sleeve 5
10. Drain Vat 1

 

 

Packaging & Shipping

Our Advantages

FAQ